FLUID MECHANICS
F1-10 Accessory
F1-26 Series/Parallel Pumps - Issue 19
The introduction of a second pump to the Hydraulic Bench system allows the study of two pump performance, both in series and parallel operation.
ORDERING SPECIFICATION
• Fixed speed pump with similar performance characteristics to pump in F1-10 Hydraulics Bench
• Mounted on floor standing plinth with ON/OFF switch
• Discharge manifold with flow control valve and pressure gauges
• All hoses and fittings supplied for easy connection to hydraulics bench in either series or parallel configuration
• Educational Software available as an option
TOPDescription
This accessory comprises a fixed speed pump assembly and independent discharge manifold interconnected by flexible tubing with quick release connectors. This auxiliary pump is intended to be used in conjunction with the basic Hydraulics Bench.
The auxiliary pump is mounted on a support plinth which stands adjacent to the Hydraulics Bench primary pump.
TOPTechnical Details
| item | value |
|---|---|
| Pump: |
centrifugal type max. head 21m H2O max. flow 1.35 litres/sec |
| Motor rating: | 0.36kW |
| Pressure gauge range: | 0 to 45m H2O |
| Compound gauge range: |
-10 to + 45m H2O |
| See Hydraulics Bench F1-10 Technical Details for primary pump characteristics. |
|
Measurement Capabilities
Determining the head/flow rate characteristics of:
> A single centrifugal pump at a single speed
> Two similar pumps operating in a parallel configuration at the same speed
> Two similar pumps operating in a series configuration at the same
speed
Requirements
F1-10 Hydraulics Bench
TOPShipping Specification
Individual accessories on request
TOPOverall dimensions
Individual accessories on request
TOP
|
 |
|---|
DATA SHEET
PRODUCT CATEGORY:
Engineering Education
F1-10 datasheetF1-10 Accessory Range:
For use in combination with the
F1-10 Hydraulics Bench
Computer aided
learning software: F1-301
Fluid Statics:
Fluid statics & manometry apparatus: F1-29
Fluid properties apparatus: F1-30
Fluid Dynamics:
Bernoulli's Theorem
demonstration: F1-15
Orifice & free jet flow: F1-17
Osborne Reynolds'
demonstration: F1-20
Flow meter demonstration: F1-21
Cavitation Demonstration: F1-28
Pitot Tube Demonstrator: F1-33
Fluid friction apparatus: C6MkII-10
Pipe surge and water hammer apparatus: C7MkII
Pipe networks accessory: C11MkII
Hydraulic Flow Demonstrator: S16
Open Channel Flow:
Multi-purpose
teaching flume: C4MkII
Hydraulic Flow Demonstrator: S16
Rotodynamic Machines:
Demonstration Pelton turbine:F1-25
Centrifugal pump
characteristics: F1-27
Demonstration Francis turbine: F1-32
Complementary Equipment
Precision Pressure Gauge Calibrator: F4
Osborne Reynolds' Demonstration: F5
Cavitation Demonstration: F1-28
Particle Drag Coefficients: F12
Hydrogen Bubble Flow Visualisation System: F14MkII
Electronic Pressure Meter: H12-8
Electronic Pressure Meter: H12-9