F1-29 FLUID STATICS AND MANOMETRY - Issue 1
This apparatus provides an introduction to the behaviour
of liquids under hydrostatic conditions (fluid at rest)
and the application of these principles to pressure measurement using manometers.
• Demonstrates the basic principles of hydrostatics
• Includes vertical tube with variable cross section,
Scale length 460 mm
• Includes demonstrations of the following types
o Single piezometer manometer tube, Scale length 460 mm
o Inclined manometer with inclinations of 5°, 30°, 60° and 90° (vertical)
o Enlarged limb-manometer
o ‘U’ tube manometer (air over liquid), Scale length 460 mm
o ‘U’ tube manometer (liquid over liquid), Scale length 460 mm
o Inverted pressurized ‘U’ tube manometer, Scale length 460 mm
• Level measurement using Vernier hook and point gauge, Range 0 to 150 mm with 0.1 mm resolution
• Allows the effect of friction to be demonstrated when fluid is in motion
> Demonstrating the behaviour of liquids at rest (Hydrostatics)
> Showing that the free surface of a liquid is horizontal and
independent of cross section
> Measuring liquid level using a scale and the effect of parallax
> Measuring small changes in liquid level using a micro-
> Measuring changes in liquid level using a Vernier hook
and point gauge
> Using a single piezometer / manometer tube to measure head
> Using manometer tubes to measure differential pressure
> Using an inclined manometer to measure small pressure
> Using a ‘U’ tube manometer to measure pressure differences in a gas (air over liquid)
> Using an inverted pressurized ‘U’ tube manometer to measure pressure differences in a liquid
> Using liquids with different densities to change the
sensitivity of a ‘U’ tube manometer
> Demonstrating the effect of trapped air on the accuracy
of a manometer
> Demonstrating the effect of flowing liquid (friction in a
fluid created by motion)
The Armfield F1-29 is designed to demonstrate the properties of Newtonian fluids and their behaviour under hydrostatic conditions (fluid at rest). This allows students to develop an understanding and knowledge of a wide range of fundamental principles and techniques, before studying fluids in motion. These include the use of fluids in manometers to measure pressure and pressure differences in gases and liquids.
Some simple exercises are included to show how the behaviour of a fluid changes when flow is involved and the relevance of concepts such as frictional losses.
The apparatus is constructed from PVC and clear acrylic and consists of a vertical reservoir containing water that is connected to a series of vertical manometer tubes. These tubes can be used individually or in combination for the different demonstrations of hydrostatic principles and manometry. One tube includes changes in cross section to demonstrate that the level of a free surface is not affected by the size or the shape of the tube. The right hand manometer tube is separate from the other tubes and incorporates a pivot and indexing mechanism at the base that allows this tube to be inclined at fixed angles of 5°, 30°, 60° and 90° (vertical).
The reservoir incorporates a hook and point gauge with Vernier scale, mounted through the lid, that allows large changes in level to be measured with better precision than a simple scale. A vertical transparent piezometer tube through the lid of the reservoir allows the static head above the water in the reservoir to be observed when the air space above the water is not open to atmosphere.
Connections at the top of the reservoir and each of the manometer tubes allows a syringe to be connected using flexible tubing that allows the static pressure of the air to be varied positively or negatively as required for the various demonstrations. The syringe and flexible tubing for filling the equipment etc. are stored at the rear of the apparatus when not in use for convenience.
A small flow can be induced through the interconnecting pipework between the various manometer tubes to provide a simple but clear demonstration of the effect of friction created by the motion of the fluid. This is useful to the student before performing demonstrations using more advanced Fluid Dynamics accessories.
The equipment is designed to demonstrate the basic principles of hydrostatics and manometry using water for safety and convenience. The use of a safe, soluble food dye in the water makes observation of the level changes clearer without affecting the operation of the apparatus. Alternative liquids, with different densities, can be used in the ‘U’ tube manometer if required to extend the range of the demonstrations.
|Max depth inside reservoir:||574 mm
|Inside diameter of reservoir:||100 mm
|Scale length of manometer tubes:||460 mm
|Manometer tubes incorporated:
||1x ‘U’ tube
2x Vertical parallel tubes
1x Vertical tube with varying cross section
1x Vertical tube with pivot allowing operation at three different inclinations
Does not require Hydraulics Bench Service unit F1-10
Individual accessories on requestTOP
Height: 1.250m (maximum to top of level gauge)
F1-10 Accessory Range:
For use in combination with the
F1-10 Hydraulics Bench
Open Channel Flow: