IRRIGATION WATER MANAGEMENT
FEL2 Soil/Water Model Tank - Issue (Provisional)
For laboratory scale investigations of surface irrigation and related systems.
ORDERING SPECIFICATION
Soil/Water Model Tank comprising:
• bench mounted narrow sand tank 1000mm x 25mm x 450mm (LxWxD), with one large side formed from a sheet of transparent material
• metal frame supporting sump tank from which water is pumped via a flowmeter to the soil surface
• flood and drip surface outlets (two can be used together by fitting a Y-connector)
• overflow system to remove surface water to sump; complete with user instructions manual.
Instructional Capabilities
As a result of using this equipment students will be able to:-
> understand surface and sub-surface effects of surface water application.
> understand optimum irrigation application rates to maximise infiltration
and minimise surface run-off.
> visualise the drainage systems.
Description
The Armfield apparatus consists of a narrow transparent fronted tank which may be partially filled with any soil type. It is supported on a bench mounted frame.
The equipment is self contained with a sump tank, pump and flowmeter fitted behind the tank. Water may be discharged along the soil surface or directed to twin drip nozzles to demonstrate trickle irrigation. Measurement of rates of water penetration into the soil is aided by a grid on the tank front.
Removable end plates allow soil samples to be changed quickly and easily.
Requirements
Water Supply:
Cold water supply
Electrical supply:
FEL2-A: 220-240V/1Ph/50Hz
FEL2-B: 120V/1Ph/60Hz
Shipping specification
Volume 0.9m3
Gross weight: 130kg
Overall dimensions
Height: 0.75m
Width: 1.1m
Depth: 0.5m
|
 |
|---|